Saakey

Hi all,
Long time no post for me... But I was wondering if anyone had a drawing (micofilm, whatever) on how to install a factory lip spoiler. I finally bought one for my car and it has lots of parts (bolts and stuff) and don't know what goes where after i figure out how and where to drill the holes

Thanks for any help!

ulrichd

This write-up helped me a great deal. One note: Do not overtighten the bolts for the side pieces. You will dimple the outside of the spoiler. Ask me how I know.

http://forums.pelicanparts.com/showt...hreadid=253142

ulrichd

One more thing: You can do it without removing the lower front valance but expect to use very colorful language when trying to reach the tops of the mounting bolts.

Rick964

I replaced my lip spoiler without removing the valence and it was abit of a struggle. I did remove the a/c condensor protection bar though and that made more finger room to work. I found a socket wrench and a ratcheting box end wrench to be very helpful for getting those nuts on.

Saakey

Thanks a lot!