James G. 968 build thread. Starting off a bit surprising.
#17
Addict
Rennlist Member
Rennlist Member
#18
#21
Drifting
#22
Rennlist Member
#24
Advanced
Thread Starter
One step forward...
I wasn't happy with the driver's side. I did it over differently. I went with a completely different method on the pass side. It was never going to be a show car. Thankfully you can't see both sides at the same time. It looks bad on the driver's side but there will only be a 1/16" of filler. I'm really happy with how the passenger side is coming out. The car looks wild with 295/30s/18s on the front.
#26
Racer
Very cool. Should look amazing when they're all smoothed out. I'll never do anything like this to my 951, but my 914 will get welded on GT flares, so I will have my own welding adventures coming up. Keep the updates coming!
#30
Advanced
Thread Starter
It's certainly a slower process than expected
I'm getting there. The bumper covers are just slapped on to see if I'm in trouble. Nothing that can't be adjusted. So here it is, a 968 with 11s front, 12s rear. 295/315 under steel. I don't know how wide a stock 968 is but this is 72".