Perry951 Late Cluster LED's - Production Run #4?
#46
Addict
Rennlist Member
Rennlist Member
Thread Starter
PRODUCTION STILL GOING - Here's the order list as of 4/6/2021:
Jay Wellwood (quantity 2) (delivered)
sweetskillsrk (bumped to end of list for now)
944Fest (delivered)
thom4782 (delivered)
fejjj (cancelled)
Zirconocene (quantity 2) (delivered)
SeaCay (delivered)
racerbvd (delivered)
fatherandson (delivered)
J_D (quantity 2) (delivered)
Tom M'Guinn (delivered)
Daniel S (delivered)
Pat1USMC (delivered)
shortyboy (delivered)
Padhammer (quantity 2) (delivered)
J1NX3D (delivered)
michael7810 (delivered)
darek_u (delivered)
bobinnova (cancelled)
Klinestein (delivered)
968to986 (delivered)
75ohm (delivered)
sledgehammer (delivered)
Scottmyl (delivered)
tbg22 (PM sent 9/8/2020, 2nd PM sent 12/13/2020. Skipped 12/17/2020 for no response. Contact me to order.)
MK802 (delivered)
RedHardTop (Not accepting PM's, tried on 12/7/2020, again 12/13/2020. Posted on main forum, skipped 12/17/2020 for no response. Contact me to order.)
Flinched (delivered)
UniqueNameHere (cancelled)
RGS (delivered)
Plumbum (cancelled)
GHEN (delivered)
Turbo Toys (attempted PM on 12/13/2020 - not accepting PM's, Posted on main forum, skipped 12/17/2020 for no response. Contact me to order.)
Chalt (Delivered)
Jack144 (PM sent 12/17/2020, ready to ship. Follow up PM sent 1/16/2021. Skipped 3/1/21 for no response. Contact me to order.)
Eric_K (PM sent 1/16/2021, ready to ship. Follow up PM sent 2/10/2021. Skipped 3/1/21 for no response. Contact me to order.)
Radmd74 (PM Sent 1/16/2021)
993944S2 (PM Sent 1/16/2021)
Mharmon944
RC713
MWC951
AnthonyGS
Jsheiry
Nathan J
jheadphones
khartman616
MattSlay*
Aivar88
ABigRock
cpayne
Rob 3
trivgar
Jay Wellwood (quantity 2) (delivered)
sweetskillsrk (bumped to end of list for now)
944Fest (delivered)
thom4782 (delivered)
Zirconocene (quantity 2) (delivered)
SeaCay (delivered)
racerbvd (delivered)
fatherandson (delivered)
J_D (quantity 2) (delivered)
Tom M'Guinn (delivered)
Daniel S (delivered)
Pat1USMC (delivered)
shortyboy (delivered)
Padhammer (quantity 2) (delivered)
J1NX3D (delivered)
michael7810 (delivered)
darek_u (delivered)
Klinestein (delivered)
968to986 (delivered)
75ohm (delivered)
sledgehammer (delivered)
Scottmyl (delivered)
tbg22 (PM sent 9/8/2020, 2nd PM sent 12/13/2020. Skipped 12/17/2020 for no response. Contact me to order.)
MK802 (delivered)
RedHardTop (Not accepting PM's, tried on 12/7/2020, again 12/13/2020. Posted on main forum, skipped 12/17/2020 for no response. Contact me to order.)
Flinched (delivered)
RGS (delivered)
GHEN (delivered)
Turbo Toys (attempted PM on 12/13/2020 - not accepting PM's, Posted on main forum, skipped 12/17/2020 for no response. Contact me to order.)
Chalt (Delivered)
Jack144 (PM sent 12/17/2020, ready to ship. Follow up PM sent 1/16/2021. Skipped 3/1/21 for no response. Contact me to order.)
Eric_K (PM sent 1/16/2021, ready to ship. Follow up PM sent 2/10/2021. Skipped 3/1/21 for no response. Contact me to order.)
Radmd74 (PM Sent 1/16/2021)
993944S2 (PM Sent 1/16/2021)
Mharmon944
RC713
MWC951
AnthonyGS
Jsheiry
Nathan J
jheadphones
khartman616
MattSlay*
Aivar88
ABigRock
cpayne
Rob 3
trivgar
Last edited by Perry 951; 04-06-2021 at 06:06 PM.
#48
Unaffiliated
I'll give you $60 for the set you bought off Ebay, shipped of course. I consider it a Perry Tribute Piece. Lightly used!
Don't spend your Saturday nights mixing epoxy on my behalf!
But I'll gladly take a fresh one if you'd prefer.. keep the tribute for your mantel!
Don't spend your Saturday nights mixing epoxy on my behalf!
But I'll gladly take a fresh one if you'd prefer.. keep the tribute for your mantel!
#49
Unaffiliated
Geez, guys, don't let my joke kill this thread and Brian's great offer.
Seriously, though, Perry, do you WANT to spend the time on this project now that you know a cheaper 'cloned' option is available to all of us?
Back when you did the design and made the first batch were you looking to get rich, or answer a call for a product that did not exist?
Do you have better things to do than fiddle for a couple of days and breathe some solder fumes for a couple of benjis?
I'd take my dog for a walk, catch a fish or work in the yard for years before I'd try to improve on a 'fair' cheap product from overseas for what I'd call a very limited (yet well gathered) market.
If you are ready to mix epoxy, please tell me where to pay-pal you.
Seriously, though, Perry, do you WANT to spend the time on this project now that you know a cheaper 'cloned' option is available to all of us?
Back when you did the design and made the first batch were you looking to get rich, or answer a call for a product that did not exist?
Do you have better things to do than fiddle for a couple of days and breathe some solder fumes for a couple of benjis?
I'd take my dog for a walk, catch a fish or work in the yard for years before I'd try to improve on a 'fair' cheap product from overseas for what I'd call a very limited (yet well gathered) market.
If you are ready to mix epoxy, please tell me where to pay-pal you.
#50
Addict
Rennlist Member
Rennlist Member
Thread Starter
LOL Dan!
I made the first set for me. After driving with them for a short time (I worked the night shift back then), I realized that they were so much better than the other options at the time so I started making small batches.
I don't mind spending some time in the evenings making these again. My son is really interested in helping (as much as a 4 year old can).
I'll PM everyone individually when your set is ready to ship. You can PayPal or I can process credit cards directly through my shop.
I made the first set for me. After driving with them for a short time (I worked the night shift back then), I realized that they were so much better than the other options at the time so I started making small batches.
I don't mind spending some time in the evenings making these again. My son is really interested in helping (as much as a 4 year old can).
I'll PM everyone individually when your set is ready to ship. You can PayPal or I can process credit cards directly through my shop.
#51
Drifting
Any chance you’d take my climate control unit and A/C etc. switches, and solder in amber LED bulbs? I do not like how much heat those switches and buttons throw off when in use.
#52
Thefu
Rennlist Member
Rennlist Member
Join Date: Sep 2003
Location: 28*09'58.16" N, 82*35'17.07" W
Posts: 19,934
Received 658 Likes
on
330 Posts
That repair method has worked for decades. However, the output of a 194 lamp is 25 lumens.. so a maximum of 75 lumens is available and a lot is lost in the reflector and the cluster housing. The LED units I developed use 9 2500mcd (11 lumens each for a total of 99 lumens) and are pointed directly at the cluster, not down the reflector. You get much more light wash on the entire gauge package. It really brightens up the interior. If the climate control wasn't so delicate and hard to work with, I'd offer a retrofit kit for it.
Anyway, back to the cluster lights, looking forward to your "we're in bidness" post.
#54
Addict
Rennlist Member
Rennlist Member
Thread Starter
Thanks SeaCay for responding about the climate control. I've added the new requests to the order list starting on page 4.
As a reminder.. NO MONEY IS DUE UNTIL YOUR SET IS READY TO SHIP. I will PM you directly at that time. I hope to be shipping units early December, possibly sooner.
As a reminder.. NO MONEY IS DUE UNTIL YOUR SET IS READY TO SHIP. I will PM you directly at that time. I hope to be shipping units early December, possibly sooner.
The following users liked this post:
SeaCay (10-14-2019)
#60
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I am also interested in a set and I need to get into the cluster to fix the ODO. How much more work is it to fit these?
__________________