924S Fuel line repair
08-10-2005, 07:04 PM
#16
Intermediate
Thread Starter
Join Date: Jun 2005
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Ok, so this is starting to make sense to me.....
Once you cut off the swedged fitting and pull off the hose, there will be a smaller diameter metal line which i feed the rubber line on to, and then clamp.
correct?
Once you cut off the swedged fitting and pull off the hose, there will be a smaller diameter metal line which i feed the rubber line on to, and then clamp.
correct?
08-10-2005, 07:24 PM
#17
Race Director
Originally Posted by ike229
Ok, so this is starting to make sense to me.....
Once you cut off the swedged fitting and pull off the hose, there will be a smaller diameter metal line which i feed the rubber line on to, and then clamp.
correct?
Once you cut off the swedged fitting and pull off the hose, there will be a smaller diameter metal line which i feed the rubber line on to, and then clamp.
correct?
