Need 3.0 crank or Hybrid here I come!!
#1
Track Day
Thread Starter
Join Date: Apr 2004
Location: FTW Texas
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Need 3.0 crank or Hybrid here I come!!
The machine shop thought the crank would be fine. Once the rod bearings were remove from the journal it became apparent that the crank is a too damaged.
So my options are to find a 3.0 S2 crank (really cheap) or install the LT1.
smmbeech - I just bought a head gasket kit.
I was hoping to keep the 3.0 motor. Even with a good crank it was going to cost more to keep the 3.0 than install the Chebby motor.
If you have a s2 crank to sell - cheap - please send me an e-mail at aduaime@direcway.com
Otherwise - I'll have some very good S2 engine parts to sell - everything but a good crank, rods, block, head, pistons etc
So my options are to find a 3.0 S2 crank (really cheap) or install the LT1.
smmbeech - I just bought a head gasket kit.
I was hoping to keep the 3.0 motor. Even with a good crank it was going to cost more to keep the 3.0 than install the Chebby motor.
If you have a s2 crank to sell - cheap - please send me an e-mail at aduaime@direcway.com
Otherwise - I'll have some very good S2 engine parts to sell - everything but a good crank, rods, block, head, pistons etc