Free: tons of OEM hardware
#1
Rennlist Member
Thread Starter
Free: tons of OEM hardware
Between the 2 cars, I've amassed a lot of nuts and bolts that I'm not going to be using for anything. Everything from M6-M12 sizes, none of it is rusty and most of them have the cadmium plating intact and in good enough condition on the threads. I literally have multiple plastic bins full and it's starting to be a bit much... I thought I would offer it here versus throwing away perfectly good hardware. Let me know what you need and just pay shipping! Can also send bulk amounts with a little bit of everything.
#5
Rennlist Member
Thread Starter
Raj, PM replied.
I'll probably have more later on...I've been replacing all hardware with new whenever I touch something, just for preservation.
I'll probably have more later on...I've been replacing all hardware with new whenever I touch something, just for preservation.
#7
Rennlist Member
Thread Starter
I've amassed a lot more hardware in my bin - considering another purge in the next week or two. I'm happy to give it away like last time, but since there seems to be interest, maybe I could split it between people who are after different things.
For example, smaller bolts - M6/M8, etc. Specialty hardware, such as clips or snap rings. Stuff like that. M10, M12, castle nuts, etc.
Let me know if there's a certain category you're interested in, and I'll check the inventory to see what the offerings are. Bear in mind, some of this stuff is greasy and some is definitely rusty. I generally re-use fasteners if they're in great shape. A lot of these are replaced because I'm after a sharp looking engine bay and underside, and oxidation on the heads doesn't fit the look. Damaged hardware will be binned, but sometimes I can't catch everything.
For example, smaller bolts - M6/M8, etc. Specialty hardware, such as clips or snap rings. Stuff like that. M10, M12, castle nuts, etc.
Let me know if there's a certain category you're interested in, and I'll check the inventory to see what the offerings are. Bear in mind, some of this stuff is greasy and some is definitely rusty. I generally re-use fasteners if they're in great shape. A lot of these are replaced because I'm after a sharp looking engine bay and underside, and oxidation on the heads doesn't fit the look. Damaged hardware will be binned, but sometimes I can't catch everything.
Trending Topics
#8
Michael,
I'm interested in any interior hardware or generic bolts. I don't really need any snap rings, castle nuts, or the like. Let me know any details if you decide to purge.
Alex
I'm interested in any interior hardware or generic bolts. I don't really need any snap rings, castle nuts, or the like. Let me know any details if you decide to purge.
Alex
#9
Do you have any of the two piece snap for the hatch carpet? One piece is a ring with 3 triangles that pushes through the carpet and fold over the snap part. Can get picture if you need.