Fully Formed 928 Spare Tire Cover - - Revisited
#16
Rennlist Member
just a suggestion....use 2 or 3 layers of vinyl sandwiched lead sheets on the underside to kill the noise. the spare tire basin is a major echo chamber. ABS is fairly acoustically transparent.....and the type of sheets I'm talking about are manufactured specifically for acoustic deadening....they're probably the best bang for the buck and by far the most effective relative to thickness
#17
Rennlist Member
That sticker looks nice, but I wonder if it is the correct one. There are at least two different stickers on these Covers originally. I have been unable to find the correct aluminum foil or sheet to make them out of. The one shown here is simply vinyl and looks ok but they need to be foil or sheet aluminum. I think the cut off thickness between foin and sheet is .005 inches thickness and I think these stickers are just at that point or maybe .007 in. The foil/sheet needs to be gold finish so they can be screen printed then clear coated and must have a sticky back. Does anyone know a source?
#18
Rennlist Member
That sticker looks nice, but I wonder if it is the correct one. There are at least two different stickers on these Covers originally. I have been unable to find the correct aluminum foil or sheet to make them out of. The one shown here is simply vinyl and looks ok but they need to be foil or sheet aluminum. I think the cut off thickness between foin and sheet is .005 inches thickness and I think these stickers are just at that point or maybe .007 in. The foil/sheet needs to be gold finish so they can be screen printed then clear coated and must have a sticky back. Does anyone know a source?
#19
#20
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
My Spare Tire Cover is still $90 plus $30 S&H. You can paypal to me at jfeather@bresnan.net. I'll ship forthwith. Jerry Feather
__________________
ReDesign by FEATHER
by Jerry Feather
Producer for 928 of:
-Hatch Latch Receiver Liner--All Versions
-Replacement Heavy Duty Spare Tire Cover
-Flush Center Console Conversion
-Cowl Cover, Cowl Seal, & Shell Stickers--All versions
(RHD included)
-Aluminum Gas Cap Ratcheting Pawl
ReDesign by FEATHER
by Jerry Feather
Producer for 928 of:
-Hatch Latch Receiver Liner--All Versions
-Replacement Heavy Duty Spare Tire Cover
-Flush Center Console Conversion
-Cowl Cover, Cowl Seal, & Shell Stickers--All versions
(RHD included)
-Aluminum Gas Cap Ratcheting Pawl
#21
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
I continue to get orders for these 928 Spare Tire Covers and have a couple of them formed and ready for final finish. One of them is going to be finished out for the 78/79 cars which are a bit different. However the batch of material I recently acquired for these had a big jump in price. That, together with Bidenflation, now compels me to rise my prices a bit. The New price for the 80 to 95 Covers is $110 and for the 78/79 is $120. The S&H to domestic locations is still at $30. I think foreign shipping is still about as previously advertised.
Email and PayPal is: jfeather@bresnan.net
Email and PayPal is: jfeather@bresnan.net
Last edited by ReDesign by FEATHER; 08-20-2022 at 11:58 AM.
#23
Rennlist Member
OK. I just shipped one to AZ yesterday. They are now $110 plus $30 S&H. I have one almost finished for you. I can finish it up tomorrow and put it in the mail by Saturday. You can paypal to me at: jfeather@bresnan.net. Send it to friends and family. Send me your name and address here on Rennlist by PM, or to the same email address.
.
.
Last edited by Jerry Feather; 11-03-2022 at 08:19 PM.
#24
Rennlist Member
Sorry, Jerry.....I misread the post. I am in need of the FOAM for the cover. I have the original cover, but the foam is disintegrated. Any solutions for that??? Also, probably need to replace the hood foam pad. Looking for help there too.
#25
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
I had one finished and packaged for shipping, but I can see now how one might misread "Fully Formed" as " Fully Foamed." This one wil not likely be here for long since I send one of these every week or 10 days.
#27
Rennlist Member
Last edited by Jerry Feather; 03-19-2023 at 12:57 PM.
#28
Jerry
I have a MY 1980 928, in need of a spare tyre cover
Please advise a total cost to get one ti Australia
Thank you
Ian
Ian Sinclair
686 Simmie Road
Echuca
Vic 3564
0419773490 iansinclair15@gmail.com
I have a MY 1980 928, in need of a spare tyre cover
Please advise a total cost to get one ti Australia
Thank you
Ian
Ian Sinclair
686 Simmie Road
Echuca
Vic 3564
0419773490 iansinclair15@gmail.com
#29
Rennlist Member
Jerry
I have a MY 1980 928, in need of a spare tyre cover
Please advise a total cost to get one ti Australia
Thank you
Ian
Ian Sinclair
686 Simmie Road
Echuca
Vic 3564
0419773490 iansinclair15@gmail.com
I have a MY 1980 928, in need of a spare tyre cover
Please advise a total cost to get one ti Australia
Thank you
Ian
Ian Sinclair
686 Simmie Road
Echuca
Vic 3564
0419773490 iansinclair15@gmail.com