18" Phone Dials
The following users liked this post:
dzaprev (10-29-2019)
#2
Race Car
Looks like they also make 17" and 18" D90s as well
https://www.augmentwheels.com/pages/porsche-inspired
https://www.augmentwheels.com/pages/porsche-inspired
Last edited by GT6ixer; 08-25-2020 at 05:57 PM. Reason: updated link
#3
They are 5 mins from my office. A set of 17” d90’s is 4K cdn not bad. I must check them out.
#4
Rennlist Member
Thread Starter
I think they look good, not cheap, however I prefer 17"... Thinking of having them make 17" manholes...that is when I have and extra $4k. With my luck and California roads I would hit a pot hole in the first week and break one or just worry about doing so.
#5
Rennlist Member
Forged? Wonder what they weigh?
I'd love a set of 17" Clubsports.
I'd love a set of 17" Clubsports.
The following users liked this post:
Michael Benno (01-06-2021)
#7
Rennlist Member
Fun!
Love the 18" D90's (Clubsports would be better) and they can make 18" Cup 2's or pretty much anything according to the site!
Love the 18" D90's (Clubsports would be better) and they can make 18" Cup 2's or pretty much anything according to the site!
Last edited by 928 GT R; 11-30-2018 at 07:37 AM.
Trending Topics
#8
Archive Gatekeeper
Rennlist Member
Rennlist Member
Van, is this the wheel company you were talking about at Sharktoberfest? You'd think I would remember, but you'd be mistaken....
#10
Rennlist Member
Thread Starter
I just received this from Dan at Augment
Every set we do is tailored for the ownerDan/car, so we can build to whatever spec you need. For reference, these were 18x8+57 fronts and 18x11+51 and the owner was utilizing a 15mm spacer in the rear
Every set we do is tailored for the ownerDan/car, so we can build to whatever spec you need. For reference, these were 18x8+57 fronts and 18x11+51 and the owner was utilizing a 15mm spacer in the rear
#11
I wonder why they didn't go to a higher ET up front since they are custom. I would have done ET 70 and 8.5" or ET 65 and 8".
#12
Rennlist Member
Custom made wheels machined from forgings at those prices in $Can [1.32 to the US dollar?] and assuming they can deliver the correct offsets- looks like a real good deal to me not to mention one gets to choose the style one wants
#13
I'm thinking 17" 7 slots. I wonder if they can do an anodized finish.
#15