Pic request for 85 - 86 engine bay.
#2
Three Wheelin'
Powdercoated intake and replated hardware. If you powder coat spend 10x the time you think is reasonable to clean out every last bit of media in the side tanks as there are lots of nooks and crannies where it can hide out as a few here have been sad to discover.
The following 2 users liked this post by zekgb:
928NOOBIE (03-11-2021),
Bertrand Daoust (03-11-2021)
The following users liked this post:
928NOOBIE (03-11-2021)
#5
Rennlist Member
The metal is treated for oxidation but they still require polishing to keep them the way they look below, just FYI. The intake is magnesium so without the coating they turn black basically...
Last edited by 928NOOBIE; 03-11-2021 at 07:53 PM.
#6
Here is an 86.5 I did last year, filler primer, feather bronze than a satin clear (all powder) Cam covers were nasty and were re-worked with Lab-metal, not perfect but once on the car they look good.
Last edited by Adamant1971; 12-11-2022 at 04:26 PM.
The following users liked this post:
Bertrand Daoust (03-11-2021)
The following 2 users liked this post by PC-85-928S:
Adamant1971 (03-11-2021),
beran earms (03-11-2021)
Trending Topics
The following 2 users liked this post by skpyle:
928NOOBIE (03-12-2021),
Bertrand Daoust (03-12-2021)
#9
Rennlist Member
my old 86.5:
#10
Rennlist Member
#12
#13
Rennlist Member
#14
#15
Rennlist Member