Anyone need some cad plating?
#1
Rennlist Member
Thread Starter
Anyone need some cad plating?
I'm about to put in a batch of 928 fasteners and small parts for gold cad plating at Plymouth Plating here in michigan. No matter how much I get plated the batch cost is $150. All parts must be pre-stripped. If you have a few or a bunch of parts you want plated and want to put them in with my order just send me a PM. Plymouth plating has a department that specializes in auto restorations and plating and they have many porsche customers, so I'm expecting good results. Shoot me a pm and we can work out details
The following 4 users liked this post by Popoboy944:
The following 2 users liked this post by Ghosteh:
beran earms (04-23-2021),
no.radar (04-25-2021)
#4
Rennlist Member
Thread Starter
#5
Rennlist Member
Is this cadmium or yellow zinc plating?
#7
Rennlist Member
https://www.industrialplatinginc.com/
765-447-7023 Ask for Danielle or Angela
Trending Topics
#8
Rennlist Member
Thread Starter
Industrial Plating is only ship to them. They only take checks no credit cards. I've had yellow zinc. Make sure all your parts are steel. Alloys don't take the yellow zinc.
https://www.industrialplatinginc.com/
765-447-7023 Ask for Danielle or Angela
https://www.industrialplatinginc.com/
765-447-7023 Ask for Danielle or Angela
thanks mike, its temping but i think i would prefer the cadmium over zinc. it does not look like industrial plating does cad.
#10
Rennlist Member
Thread Starter
#11
Rennlist Member
#12
Rennlist Member
Thread Starter
i went to a local porsche mtg last fall at rustlers roost but have not made a 928 specific one. i have met a dave that has a bunch of 928s that seems to know everyone in the area a couple times at least, but not hte 928OC in general yet. pandemic times.........
#13
Rennlist Member
#14
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#15
Rennlist Member
Thread Starter