MaxJax
#1
Rennlist Member
Thread Starter
MaxJax
I love my MaxJax. But, most of the under the car tools and equipment are too tall. So, after procrastinating about raising the separate garage's roof long enough I decided to reduce the height of a screw jack and oil change catch pan.
I had my local machine shop remove 12" from each. Not too short that they cannot be used when the taller roof and lift are installed.
I had my local machine shop remove 12" from each. Not too short that they cannot be used when the taller roof and lift are installed.
The following users liked this post:
hlee96 (07-03-2021)
#2
Rennlist Member
sometimes the simplist solutions are the best
#3
Burning Brakes
Beats digging a service trench
I love my MaxJax. But, most of the under the car tools and equipment are too tall. So, after procrastinating about raising the separate garage's roof long enough I decided to reduce the height of a screw jack and oil change catch pan.
I had my local machine shop remove 12" from each. Not too short that they cannot be used when the taller roof and lift are installed.
I had my local machine shop remove 12" from each. Not too short that they cannot be used when the taller roof and lift are installed.
The following 3 users liked this post by Speedtoys:
#5
Rennlist Member
Tools
I love my MaxJax. But, most of the under the car tools and equipment are too tall. So, after procrastinating about raising the separate garage's roof long enough I decided to reduce the height of a screw jack and oil change catch pan.
I had my local machine shop remove 12" from each. Not too short that they cannot be used when the taller roof and lift are installed.
I had my local machine shop remove 12" from each. Not too short that they cannot be used when the taller roof and lift are installed.
The following users liked this post:
RSMartin (07-05-2021)