Custom Porsche 928 Watch
The following users liked this post:
85euro928 (08-22-2021)
#4
Drifting
That is a watch dog for sure!
The following 2 users liked this post by SwayBar:
no doubt (08-20-2021),
SMTCapeCod (08-23-2021)
#5
Rennlist Member
The following users liked this post:
jWs-928 (08-29-2021)
#7
Rennlist Member
Trending Topics
#8
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
I guess that I should have posted the availability of these 928 watches in my business sponsorship since I have more than one of them to sell. I had the foresight of obtain several of the newly designed watch dials by Shawn several years ago and have them put into Seiko watches for which they were designed, primarily to satisfy whatever later market might show up for any of them. Now might be the time. I have about 16 of them and now offer them for $300 each. That includes what I paid for the dials, for the conversion at a qualified watchmakers, and for what I paid for the watches, plus something for what I have had invested in them for now about 8 years. There are two basic styles of the watches, differing mainly on how they are connected to the watch bands. Here are a couple of pictures of them.
__________________
ReDesign by FEATHER
by Jerry Feather
Producer for 928 of:
-Hatch Latch Receiver Liner--All Versions
-Replacement Heavy Duty Spare Tire Cover
-Flush Center Console Conversion
-Cowl Cover, Cowl Seal, & Shell Stickers--All versions
(RHD included)
-Aluminum Gas Cap Ratcheting Pawl
ReDesign by FEATHER
by Jerry Feather
Producer for 928 of:
-Hatch Latch Receiver Liner--All Versions
-Replacement Heavy Duty Spare Tire Cover
-Flush Center Console Conversion
-Cowl Cover, Cowl Seal, & Shell Stickers--All versions
(RHD included)
-Aluminum Gas Cap Ratcheting Pawl
#9
Rennlist Member
Man, I remember everyone arguing over how that design should look back before it was made! I was in the camp that thought the "928" at the 9 oclock position should have been tilted down so that the 9 was at 9 oclock and the 8 was at 8 oclock, with the 2 in between.
#10
Rennlist Member
Thread Starter
If anyone has an old file of one of the original dial designs than can be edited-
or a good pic/scan of a non installed face and wanted to post it- that would be cool!
or a good pic/scan of a non installed face and wanted to post it- that would be cool!
The following users liked this post:
Speedtoys (08-23-2021)
#12
Rennlist Member
I'll look around, but I can't even imagine where that might be. The '928 watch' thread where we designed it is probably as good a source for an image of the dial as any.
#15
Race Car
forsooth
Alas, that silly S4 appendage hanging off the back..
I guess that I should have posted the availability of these 928 watches in my business sponsorship since I have more than one of them to sell. I had the foresight of obtain several of the newly designed watch dials by Shawn several years ago and have them put into Seiko watches for which they were designed, primarily to satisfy whatever later market might show up for any of them. Now might be the time. I have about 16 of them and now offer them for $300 each. That includes what I paid for the dials, for the conversion at a qualified watchmakers, and for what I paid for the watches, plus something for what I have had invested in them for now about 8 years. There are two basic styles of the watches, differing mainly on how they are connected to the watch bands. Here are a couple of pictures of them.
The following users liked this post:
M. Requin (09-08-2021)