When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The exterior of this car is really coming along nicely. It looks like you are conducting a very thorough restoration. I am curious about what your plan was to deal with the surface condition of the engine bay, the surface rust near the washer bottle, and the interior. Did you already address those areas or is the plan to leave them as they were?
Last edited by Michael Benno; 01-31-2023 at 12:13 PM.
The exterior of this car is really coming along nicely. It looks like you are conducting a very thorough restoration. I am curious about what your plan was to deal with the surface condition of the engine bay, the surface rust near the washer bottle, and the interior. Did you already address those areas or is the plan to leave them as they were?
All rust was cut out and welded up. The driver side was bad as well up top, both areas had huge mice nests which did not help the corrosion. Current plan for the undercarriage and engine bay is to simulate the factory finish by applying a coat of yellow primer then orange in spots to simulate the factory overspray. The engine bay and underside are mostly rust-free, just the small tabs that bend and hold the cables and lines need to be cleaned up and re-finished.
Adam I just saw it in post 17 I can see the front bumper can,
it looks like its in good condition IE not crunched,
you could swap these for bumper shocks.
01-30-2023, 09:15 PM
