Does anybody offer an X-pipe for MSDS headers?
#16
Rennlist Member
I got one from 928 Motorsports back in the day, and had a local shop fit it. They told me it required "a good bit of adjusting." Made me glad I didn't try to do it myself.
#17
Rennlist Member
Thread Starter
This is the first few feet of the exhaust that was bolted to the MSDS headers on my GTS before I removed them. I'm going to see if my local custom exhaust shop can use these as a pattern to build an x pipe.
Last edited by Kevin in Atlanta; 12-08-2023 at 01:00 PM.
#19
Rennlist Member
Thread Starter
#20
Why don't you just knock the rust off, and have that coated and re use it?
#21
Rennlist Member
Thread Starter
The following users liked this post:
Baun Performance (12-15-2023)
The following 3 users liked this post by DHS928:
#23
#24
Rennlist Member
Here are new headers for S4 from the UK! Fitting is like stock.
https://www.ritech-systems.com/copy-of-x-pipes
https://www.ritech-systems.com/copy-of-x-pipes
Last edited by Darklands; 12-15-2023 at 05:25 PM.
The following users liked this post:
U-928 (12-16-2023)
#25
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Here are new headers for S4 from the UK! Fitting is like stock.
https://www.ritech-systems.com/copy-of-x-pipes
https://www.ritech-systems.com/copy-of-x-pipes
#27
1st thing I would do with those headers is cut the mounting flanges between cylinders. Stainless thermal expansion rate is half of aluminum.
#28
Jake, with Baun Performance here!
Kevin I’d be happy to help with your X pipe project if you’re willing to make the trip to Clover, SC (just south of Charlotte, NC).
Here’s the full photo dump from the MSD back system I completed today, and I can link a video below to the 928 Euro system I built a few years ago (OEM manifolds).
Here’s the link to the OEM manifold Euro (driving clips at the end!)
I’ll have a similar video on the MSD equipped car this weekend.
Kevin I’d be happy to help with your X pipe project if you’re willing to make the trip to Clover, SC (just south of Charlotte, NC).
Here’s the full photo dump from the MSD back system I completed today, and I can link a video below to the 928 Euro system I built a few years ago (OEM manifolds).
Here’s the link to the OEM manifold Euro (driving clips at the end!)
I’ll have a similar video on the MSD equipped car this weekend.
The following users liked this post:
slownrusty (12-16-2023)
#29
Rennlist Member
Thread Starter
Jake, I'll definitely reach out to you for the x-pipe and exhaust back. Sounds like an interesting winter project.
I also have a Devek level 2 set of headers that I'd like the same treatment.
Kevin
I also have a Devek level 2 set of headers that I'd like the same treatment.
Kevin
#30
I specialize in 2015-current VW GTI, GLI & Golf R. Production parts busy season is generally March-November.
Email is the best way to reach me,
jlbaun26@gmail.com
or on my FB business page
Facebook Post