3d Printing Resource for the printerless
#1
Rennlist Member
Thread Starter
3d Printing Resource for the printerless
Forum member depami and others have made some great stuff for our cars with 3d printers and have been very generous in sharing files used to produce the parts.
I do not have a 3d printer nor do I have any intention of going down the enticing but time and resource sucking rabbit hole that would follow from obtaining one.
I have found, however, that there are multiple vendors of 3d printing services out there and like this one the best: Craftcloud
I was pleasantly surprised at the cost of getting things made.
I do not have a 3d printer nor do I have any intention of going down the enticing but time and resource sucking rabbit hole that would follow from obtaining one.
I have found, however, that there are multiple vendors of 3d printing services out there and like this one the best: Craftcloud
I was pleasantly surprised at the cost of getting things made.
The following users liked this post:
Gary Knox (12-29-2023)
#3
Rennlist Member
I was thinking the same thing earlier today. In fact, I e-mailed Roger to see if/when he'd be selling some of those rear wiper arm spacers. Good to know there's alternatives
#4
Rennlist Member
I had a wiper fluid reservoir filler neck 3d printed. It came out great and cost $50 or so.
#5
RL Community Team
Rennlist Member
Rennlist Member
I think there's a company called shapeworks or something like that someone had recommended to me before as well