JE_951

Damn looks like i jumped a little too soon. I jsut ordered a 38mm off ebay for $209 (shipped) with a 1 bar spring (brand new unit). Oh well, ill be in for the adaptors if someone is going to get that going.

DOes anyone here have good relations with the speedforce guys? I could e-mail them about a group buy on the adaptors but someone else may get better feedback since i have never done business with them. Otherwise I could try it. Just let me know...

nize

if you'll read backchat, you'll see that tim of speedforce has already posted and stated he's willing to support a group buy. pay attention jace !

JE_951

haha whoops i skipped page 3. Sounds good. Im in for adaptors!!

Peter- where the hell you been. I havent seen you post in months!

nize

also jace, you might want to hold off on your mods until you see what i've got up my sleeve in about 3weeks or so.

vanwyk4257

Let's get a list of people making a firm commitment on wastegates including which model, 38 or 46mm and what size springs. If we can get enough people on board I will move forward with this. Even if you have already replied earlier in the thread please do so again and include whether you want the adapters as well so I can tabulate the numbers at the beginning of the thread.

nize

46mm with .7bar spring and adapters

JE_951

just adaptors

5speed300

Im just in for adaptors as well

Naplesguy06

How does this part compare to the Lindsey Wastegate, they reatail for 300 out the door. Dont know if an adaptor or spring is an issue, however.

ehall

Tial makes the best WG's available. Lr's is just a rewbuild and slight mod of the stock WG.

Porsche-O-Phile

What about the LR dual-port? I've kind of wondered about that one too, but I don't know much about 'em.

ehall

I'm running one Jeff. No issues with it after a few years. It is the same as above though. If I had it in the budget to toss 3 hundred at something, I would still replce it with the Tial.

Naplesguy06

I am confused a bit please bear with me. If I order the Tial wastegate F38 with a 1 bar spring, I still need to buy the Stainless or mild Flange plus the adapters?. what about anything else? Also, if I have a huntley turbo thats bored and clipped(cheater) will this work o.k. with this wastegate ?
Finally, I read the thread for an hour on boost controllers, Tru Boost AEM-30 or Blitz sbc Id?. I can see that Lindsey,s wastegate isnt even a consideration with you all so I wont ask.
T.Y.
George

JE_951

IS this still going through? IF we cant do the tials then i still want to do the adaptor group buy. Anyone interested?

vanwyk4257

There aren't enough people commited to this to make a go of it.