When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I realize this is a long shot. If you have a set of pistons for sale, please contact me. Doesn't matter if they are for steel sleeves or alusil. Trying to save some time here. New pistons are easily 10 weeks wait!!
To expensive. Machining the crank will be very expensive and I would have to buy new rods, and new bearings, and the ones I have are only used a few hours.
I have a new set of JE pistons made for a 968 turbo project - 104MM bore with valve clearance pockets and an 8:1 compression ratio. No coatings on them.
Pistons, pins and rings for $650, ready to ship right now!
I have a new set of JE pistons made for a 968 turbo project - 104MM bore with valve clearance pockets and an 8:1 compression ratio. No coatings on them.
Pistons, pins and rings for $650, ready to ship right now!
Thanks Chris. You are a real stand up guy. Email sent.
I have a new set of JE pistons made for a 968 turbo project - 104MM bore with valve clearance pockets and an 8:1 compression ratio. No coatings on them.
Pistons, pins and rings for $650, ready to ship right now!