theedge

Selling my Escort Cups. They have Eibach 500 lb springs in the rear, 400 in the front. They do look rough but are working fine. One front unit has a blemish on the shaft, I think it has been there forever and doesnt seem to have caused any issues. I did not use these on the track. They come with Racers Edge top perches. The two lock nuts on the front are new, couldnt find silver ones so I got black.

Included as well are the two wrenches and a spare lock nut. No camber plates are included and no bolts.

Looking for $900CDN shipped in Canada, Paypal only.

Currently only for sale in Canada, if no takers in Canada I will sell in the US. I am located in Burnaby, BC if someone local wants them.

dmcampbell

Are the spring diameters the same or mixed between Front and Rear? 2.5 or 2.25 inches? Thanks, Mike

theedge

Same diameter, 2.25" front and rear.

Exact Eibach part numbers are:
0800.225.0400
0800.225.0500

jtsporsche

Anything else needed to fit these to a stock '86?
Did you use the rears with or without torsion bars?

theedge

I used these without torsion bars, but it did result in a very low car. May have been able to get it higher but I didnt try everything I could have tried to do so.

jtsporsche

What size wheels and tires did you have?
Also, is there anything else needed for install? Are camber plates necessary? Sorry, im kind of a noob.

theedge

Stock 86 phone dials at the time. You would need front camber plates yes, nothing needed for the rear besides your stock bolts.

These may be pending sale to someone, so you would be second in line. I will let you know if he passes.

jtsporsche

Ok, if the time comes, send me a PM, and thanks for the info.