OBD1 Scantool Interface Group Buy (fully assembled)
#226
Instructor
Join Date: Jul 2010
Location: Vancouver, WA
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Please, this would be a great asset. The list of contents is still the same correct? And has any one ran ScanTool on WIN7 64bit yet? Thx much in advance. -D²
A 964 model please.
A 964 model please.
#227
Rennlist Member
Update: I wanted to let you all know that Ricardo and I have finalized the design and the production planning. I have a website all ready to go to accept orders, and we will be posting this site live in mid August to take orders on the Scantool. This date is due to some work issues, and time out of the country... we need to schedule some time to build the kits and fulfill orders.
We're almost there! Stay tuned... I will release the ordering information on this thread as well as on a new one on the 964 board.
Thanks
We're almost there! Stay tuned... I will release the ordering information on this thread as well as on a new one on the 964 board.
Thanks
#229
If you need help or sources for building smaller run pcb boards just let me know, we deal with this in both the US and Asia. If you have a board design I could possibly see if our asian manufacturer would do a short run (100 or so) and they could size it so it will go right into a Bud box... I have some experience with this obviously but mostly in just putting it all together, I am far from an electronics person but can help except the fact I'll be out of the country for 3 weeks starting this weekend.
#231
Rennlist Member
I don't have data on that. Conceivably if it is using the same plug, and it has Motronic, it should work, but some of the functions may be different, thus inaccessible to the software.
We're only really building the interface, the software really controls what functions it can access....
We're only really building the interface, the software really controls what functions it can access....
#232
Rennlist Member
Thread Starter
Guys,
Assembled boards just shipped and then the next piece is the connectors which are about a week behind. Then it a lot of work to populate the pins on all those connectors and put that cable assembly together. So we are a few weeks away still.
993 always had that immobilizer issue and so 993 will not be supported in this initial re-run. I have all the bits and pieces to make 993 units but if it doesn't work or I can't tell someone how to make it work consistently the its not right to offer that.
Anyway it will be good to be offering these up again and Tom's new website will allow us to collect the information from Rennlisters on using the software and diagnosing troublecodes.
And I finally got the right wheels on my car!
Assembled boards just shipped and then the next piece is the connectors which are about a week behind. Then it a lot of work to populate the pins on all those connectors and put that cable assembly together. So we are a few weeks away still.
993 always had that immobilizer issue and so 993 will not be supported in this initial re-run. I have all the bits and pieces to make 993 units but if it doesn't work or I can't tell someone how to make it work consistently the its not right to offer that.
Anyway it will be good to be offering these up again and Tom's new website will allow us to collect the information from Rennlisters on using the software and diagnosing troublecodes.
And I finally got the right wheels on my car!
#234
Rennlist Member
Thread Starter
Yes! Assembled boards have arrived. Just waiting on connectors for the cable assembly and then Tom takes over assembly from there. Connectors are being machine now.
All the best,
Ricardo
All the best,
Ricardo
#238
Rennlist Member
Thread Starter
About three years. No changes at all. Just trying to take care of everyone who wants one. Also, Tom Bennett is helping me with orders and assembly so we can keep doing small runs as required. It was just too much for me last time that I couldn't justify doing it again. With Tom's help it takes care of my issues.
Ricardo
Ricardo
#239
Three Wheelin'
Cool- I just used my V1.o the other day.. the thing rocks.. well, it's just about impossible to get running on a mac because of the port issues, so I had a friend give me his ex-GF's PC laptop and I got it running on that.. its the only thing that the laptop runs.. kind of a dedicated server for the 993.. hahahha.. I could only imagine having it run on an iPhone.. that would be my dream.. put a bluetooth chip on the board, write a small app, waste another 2 years of frustration and time and sell a few hundred at best.. well.. I'll stick with that crappy PC laptop i guess..
Next issue Ricardo, take on that spoiler control box here:
https://rennlist.com/forums/993-foru...ol-module.html
Next issue Ricardo, take on that spoiler control box here:
https://rennlist.com/forums/993-foru...ol-module.html