NEED HELP - I would like to borrow...
#1
Nordschleife Master
Thread Starter
NEED HELP - I would like to borrow...
I am looking for a rear adjustable 964 Cup rear sway bar (no endlinks) for a track event at the end of July. I am trying to address some rear issues I'm having with my car and would like to try a stock rear sway bar in place of my TRG 22mm one. If anyone has one for sale or that I can borrow, please let me know. TIA.
#4
Rennlist Member
I have a spare RS (19mm) that you can borrow in about two weeks (swapping in TRG 22mm!). What size is the Cup bar?
#6
Nordschleife Master
Thread Starter
I appreciate the feedback, someone locally had one that I borrowed.
The RS bar is listed in PET as 18mm, and is the same as the Cup bar, but the ones we have on the Cups measure 19mm.
The RS bar is listed in PET as 18mm, and is the same as the Cup bar, but the ones we have on the Cups measure 19mm.
#7
Rennlist Member
I have been shopping for rear TRG bars lately, and they make both a 19mm and 22mm; the smaller size is probably what I was thinking of.
I decided to measure some of my bars:
RS front: 24.0 mm consistent
RS rear: ave 18.7mm, but ranges from 18.25 to 19.1
TRG rear: 22.35mm consistent
Trending Topics
#8
Addict
Rennlist Member
Rennlist Member
I thought the RS bar was a 19 mm too (I have one on my 993). It was a real pain because they had the wrong size bushings for it in the bags (with the correct part number) and I needed to get the right size bushings... I have the TRG 22 mm on the Turtle.