964 CARRERA 4 ABS AND PDAS INTERFACE TEST SET – VOLUNTEERS?
#31
Subscribed - and please put me down as interested when available - hopefully months away from being able to touch my car and can think of nothing better than going through the system.
Alexjc4 - nice feedback, looking forward to hearing more from those that have the unit and are testing.
Alexjc4 - nice feedback, looking forward to hearing more from those that have the unit and are testing.
#34
Current status -
Here's the current status -
One small wiring issue has been discovered that (of course) rippled through the test procedure and the test observations. The fix is pretty simple, Alexjc4 has volunteered to incorporate the fix on his unit and let us know how it works.
Alex is also investigating adding a function to actuate the lat and long locks after all the wiring has been validated. Hopefully he'll get a chance to update us soon.
Stay tuned,
Michael
One small wiring issue has been discovered that (of course) rippled through the test procedure and the test observations. The fix is pretty simple, Alexjc4 has volunteered to incorporate the fix on his unit and let us know how it works.
Alex is also investigating adding a function to actuate the lat and long locks after all the wiring has been validated. Hopefully he'll get a chance to update us soon.
Stay tuned,
Michael
#38
Three Wheelin'
Here's the current status -
One small wiring issue has been discovered that (of course) rippled through the test procedure and the test observations. The fix is pretty simple, Alexjc4 has volunteered to incorporate the fix on his unit and let us know how it works.
Alex is also investigating adding a function to actuate the lat and long locks after all the wiring has been validated. Hopefully he'll get a chance to update us soon.
Stay tuned,
Michael
One small wiring issue has been discovered that (of course) rippled through the test procedure and the test observations. The fix is pretty simple, Alexjc4 has volunteered to incorporate the fix on his unit and let us know how it works.
Alex is also investigating adding a function to actuate the lat and long locks after all the wiring has been validated. Hopefully he'll get a chance to update us soon.
Stay tuned,
Michael
With regards the PDAS system, while the 964 has been away I have been playing with data logging to observe the similar AWD system (ATTESA ETS) on my R32 GTR in action. The 964 is similar in that it uses electro hydraulic activated clutch packs on the differentials,the difference is the GTR has a plate rear diff and an active centre diff ("transfer case" in GTR parlance) only and is engineered somewhat more in favour of oversteer I'm hoping to be able to log similar data on the PDAS to show how and when it really intervenes.
#41
Hi Dirk,
The "volunteer" part of the development was completed a few years ago and led to several improvements. I did undertake a limited production run of 20 units and still have parts on hand to complete a few more. I would be happy to assemble one for you. Costs for this run have been $380 shipped to US addresses (usually another $55 for other destinations).
If you send me an outside email address, I would be happy to send you an electronic copy of the User Manual and Test Procedure to help you determine how to proceed.
Best regards,
Michael
The "volunteer" part of the development was completed a few years ago and led to several improvements. I did undertake a limited production run of 20 units and still have parts on hand to complete a few more. I would be happy to assemble one for you. Costs for this run have been $380 shipped to US addresses (usually another $55 for other destinations).
If you send me an outside email address, I would be happy to send you an electronic copy of the User Manual and Test Procedure to help you determine how to proceed.
Best regards,
Michael
#43
Hi Michael,
I am a French owner of a Porsche C4 living in a French tropical island near by Madagascar.
I am really interested by Your C4 ABS tester with the 55 pin cable for the C4.
Are you still selling it ? because i would like to order one for the C4.
I hope you are still assembling the C4 ABS tester.
Waiting for your reply ... Best regards from Reunion island.
Christian
I am a French owner of a Porsche C4 living in a French tropical island near by Madagascar.
I am really interested by Your C4 ABS tester with the 55 pin cable for the C4.
Are you still selling it ? because i would like to order one for the C4.
I hope you are still assembling the C4 ABS tester.
Waiting for your reply ... Best regards from Reunion island.
Christian
#44
Hi Michael,
I have forgetted my email in last message.
Here it is : christian.lengaigne@gmail.com
Best regards
Christian
I have forgetted my email in last message.
Here it is : christian.lengaigne@gmail.com
Best regards
Christian
#45