981 Spyder - Removing Roof-fin Plastic Mounts
#1
Addict
Rennlist
Lifetime Member
Rennlist
Lifetime Member
Thread Starter
981 Spyder - Removing Roof-fin Plastic Mounts
I would like to adjust one of the on-trunklid locating lugs that sits on the underside of the rear lid and engages with the yoke in the roof storage area when the trunklid is closed.
There are two Torx screws, but it looks like a third (or similar) is accessed from underneath the plastic 'Spyder' roof-fin mount on the other side.
Anyone know how to remove these, or adjust what I want to without doing so?
Thanks.
There are two Torx screws, but it looks like a third (or similar) is accessed from underneath the plastic 'Spyder' roof-fin mount on the other side.
Anyone know how to remove these, or adjust what I want to without doing so?
Thanks.