stevensivak

Other than an airbag light, are there any other issues to be concerned with when removing the passenger seat?

Worried that the car won't start, etc, etc

thanks

stevensivak

no one has taken the seat out???

RichAA

It's covered in the first 3 steps of this PDF:

http://www.rennline.com/PDF/991-ROLL...-WITH-PICS.pdf

I did this on my 997. Be super careful plugging the harness back together, because the pins are fragile.

Boba_kz

no any problem

stevensivak

I am taking the seat out semi-permanently...

The issue or question was not HOW to take the seat out but what happens when you do...

and I mean does the car start?
does it affect other air bags? As in system failure??

Stuff like that...
but I guess if there are no issues for roll bar installation, which I assume requires removing the passenger seat, then seat removal will be fine..??

thanks

Boba_kz

Race my car on the track

stevensivak

no issues?
no problems?

Boba_kz

Only air bag warning light. It can be removed also by resistor.

stevensivak

What do you mean it can be removed by resistor?

Is that a dealer activity? Or a do it yourself thing?

thanks

Boba_kz

By yourself

stevensivak

what is required?

how do you do it?

Boba_kz

I'm personally didn't do, but I know it is possible.

stevensivak

ok-

if you find out, be sure to let me know
thanks
SS

Oak

no resistor needed I removed the belt receptacle from the seat and just Velcro the receptacle on the floor and plugged the belt receptacle back in. the ecu thinks the seat is installed...

marinb

There's no way this works for the 991. You'll definitely get an airbag warning. It's looking for more than just the belt receptacle on the passenger side.