Do you need a "code" to enable PSE button on 991.1?
#1
Burning Brakes
Thread Starter
Do you need a "code" to enable PSE button on 991.1?
I have a valved exhaust and purchased the console switch for my 4S. I have all the vacuum lines hooked up and it operates as a non-PSE S model should. Can a PIWIS program the exhaust switch to operate using the PSE switch? Do I need a "code" to do this for a 991.1? I have seen conflicting posts on this and want to clarify. Any real world input would be appreciated.
#2
Rennlist Member
Yes, the newly installed PSE button must be coded to operate the valves.
The following users liked this post:
Catharpin (03-18-2023)
#3
Burning Brakes
Thread Starter
I have heard some say they need a unique "code" to enter that a seller must provide to enable the function, I don't want to spend the time to go to a shop and them to tell me I need this. I don't have PSE, I have a valved exhaust I wat to actuate via the PSE button.
Last edited by Catharpin; 03-17-2023 at 10:21 PM.
#4
Rennlist Member
Just call ahead and ask. Two area dealers around me were happy to do it.
The following users liked this post:
Catharpin (03-18-2023)
#5
Burning Brakes
Thread Starter
Thank you!! I am pretty sure I can get it done.
#6
Burning Brakes
IIRC the code is for Sport Chrono package and not just PSE. My car came with AWE switchpath and I changed to PSE and then immediately regretted it and reverted the very next day. I’ve grown to liking the AWE now - still prefer the sound of the 997.1 cars though 😜
Trending Topics
#8
Rennlist Member
how do the valves currently open and close now? do you have a key fob remote?
#9
Rennlist Member
#10
Rennlist Member
One Boston area dealer quoted me one hour labour - $209, and the other $400.
#11
1 hour, I think it was around $180 USD after tax. They tried to charge me $15 for shop supplies but they removed it after I asked them to show me what shop supplies were used
The following users liked this post:
tilac999 (03-20-2023)
#12
Rennlist Member
#13
I have a valved exhaust and purchased the console switch for my 4S. I have all the vacuum lines hooked up and it operates as a non-PSE S model should. Can a PIWIS program the exhaust switch to operate using the PSE switch? Do I need a "code" to do this for a 991.1? I have seen conflicting posts on this and want to clarify. Any real world input would be appreciated.
Jim
PSE activation instructions with PIWIS
Last edited by Jim981CS; 03-29-2023 at 11:38 AM.
The following 3 users liked this post by Jim981CS:
#14
Burning Brakes
Thread Starter
Yep, I had mine coded by an indy yesterday, no code needed,
Thanks for the reply!
Thanks for the reply!