e9stibi

Does anyone can post some experience with door sills offered on ebay from "sales4pnparts"? (Quality, Fit etc.)

Here is the link:

http://cgi.ebay.com/ebaymotors/PORSC...QQcmdZViewItem

Thanks
Erik

InTheAir

I believe those are the ones that many around here have used.

Did you try searching the forum for "sales4pnparts"?

allill

do you have to remove the plastic ones to put these on?

InTheAir

yes

CarmG993

I believe these are the ones I purchased. If so, pretty good quality, quick turnaround.

dhicks

Go to Harvey, at - 944nut@comcast.net , he has provided all mine and they have been very good quality, or his ebay is

http://cgi.ebay.com/ebaymotors/ws/eB...tem=7961710435

If the link doesn't work just put 7961710435 in the eBay search box and
press "Find it"

dhicks

This is one of his......he can do either pos or neg

Simon Shearer

I have purchased these sills; in fact because I live close by I went to his house in Mechanicsville area and picked them up. Nice person to deal with and the sills are very good quality. The old sills are easy to get off, but at least with mine, the old glue/tape was very difficult to remove.

Slow Guy

That's good to hear. To remove the tape / glue I've had good results with the 3M Adhesive Remover (in red & white can) and using a PLASTIC putty knife. I usually find the 3M in NAPA stores in the bodywork (bondo) area.

993C4Smontreal

does any one have a pic of the OEM sills for the 993 (4S preferably). Harvey emailed me this pic..it looks nice and can have the S in red or black.

Boeing 717

Thats good to hear i was going to order some from him but was worried about quality because these things typically can run from 300-600 dollars. I like the black with silver script.

JERRY

Bill (NC)

Very nice product, figure about 1 to 1 and a half hours per to clean the old sills off for installation. Not hard, just time consuming.

Steve 96C4S

This is what the stock sills look like. Good luck with your purchase.


Steve R