What is a 02 996tt x50 needing engine work worth?
#167
Here is my lab results on my M1 5w-50 at 4500 km all seems pretty good.
Open link below for better viewing.
http://www.roktex.com.au/sharedReport?published=530226
Laboratory Results
Overall Rating
fine
Laboratory Comments
Jim,
Flagged data does not indicate an immediate need for maintenance action. Continue to observe the trend and monitor equipment and fluid conditions. FUEL DILUTION is at a MINOR LEVEL; FUEL DILUTION has caused viscosity to decrease slightly below grade; Molybdenum is slightly high for this lubricant.
calcium 1448
water<.1
oxidation 25
lead 2
silver 0
nickel 0
boron 274
FTIR soot <.1
iron 9
TBN 7.39
potassium 6
fuel dilution 2.7
copper 3
molybdenum 276
nitration 10
silicon 8
antimony 2
cadmium 0
Viscosity at 100 - 15.7
barium 1
sodium 5
tin 0
chromium 0
titanium 0
phosphorus 1005
aluminium 2
zinc 1125
magnesium 883
vanadium 0
Order Details
Client Name
Organisation Name
Make Porsche
Model 996 Turbo
Year Of Manufacture 2003
Number Plate/Equipment Id
Share Report URL of shared report. You can copy and paste it into an e-mail for your mechanic or to place on a car forum and other websites. http://www.roktex.com.au/sharedReport?published=530226 View Shared Report
NO GUARANTEE expressed or implied is made against failure of this equipment and any liability is limited to replacement cost of the sampler.
Open link below for better viewing.
http://www.roktex.com.au/sharedReport?published=530226
Laboratory Results
Overall Rating
fine
Laboratory Comments
Jim,
Flagged data does not indicate an immediate need for maintenance action. Continue to observe the trend and monitor equipment and fluid conditions. FUEL DILUTION is at a MINOR LEVEL; FUEL DILUTION has caused viscosity to decrease slightly below grade; Molybdenum is slightly high for this lubricant.
calcium 1448
water<.1
oxidation 25
lead 2
silver 0
nickel 0
boron 274
FTIR soot <.1
iron 9
TBN 7.39
potassium 6
fuel dilution 2.7
copper 3
molybdenum 276
nitration 10
silicon 8
antimony 2
cadmium 0
Viscosity at 100 - 15.7
barium 1
sodium 5
tin 0
chromium 0
titanium 0
phosphorus 1005
aluminium 2
zinc 1125
magnesium 883
vanadium 0
Order Details
Client Name
Organisation Name
Make Porsche
Model 996 Turbo
Year Of Manufacture 2003
Number Plate/Equipment Id
Share Report URL of shared report. You can copy and paste it into an e-mail for your mechanic or to place on a car forum and other websites. http://www.roktex.com.au/sharedReport?published=530226 View Shared Report
NO GUARANTEE expressed or implied is made against failure of this equipment and any liability is limited to replacement cost of the sampler.
#169
#170
The engine is alive again. I've put around 500 miles on it since i got it back, took a bit of time because i was out for a couple weeks.
So far the engine feels great, i'd say stronger than before but that could be because i didn't drive it for 2 months.
I think the engine also stopped making that chain rattle noise that it used to at idle. I hear that most 996TTs/996s in general make that though, so it's probably a matter of it breaking in some more.
All in all the car now has a practically new engine and some other assorted bits, so hopefully it'll be super reliable for a while.
So far the engine feels great, i'd say stronger than before but that could be because i didn't drive it for 2 months.
I think the engine also stopped making that chain rattle noise that it used to at idle. I hear that most 996TTs/996s in general make that though, so it's probably a matter of it breaking in some more.
All in all the car now has a practically new engine and some other assorted bits, so hopefully it'll be super reliable for a while.