When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Has anyone actually have any issues with their 6 CD changer after installing Mr12Volt in their PCM 3.0?
Somehow mine doesnt work anymore at all after the install of the board, but the ribbon cable seems connected properly.
Also, maybe more ppl could raise an improvement potential with Mr12Volt which is integrating a connector in the main harness from the video board to the blue box on the side of the PCM, so it would be quite a bit easier if the PCM needs to be removed for troubleshooting or things like that rather than having to re-route the whole harness all the time....
I'll check on the calibration. This is unusual. Most often is ribbon cables that are not properly aligned that cause these issues.
I have pcm 3.1 and 3.0 units in stock. Now offering free install kit with code "toys" for rennlist members.
__________________
Modernize your P-Car w/ Mr12Volt. Apple Carplay and Android Auto with superior audio quality, features, and support. Reach out for specials! Torque.Acs@gmail.com or Roman (267) 317-8229
@Thomas_@Roman ACS I installed the new firmware for my PCM 3.0 PDK car. No perceptible change. I still get a black screen with gridlines when shifting into reverse. I'll reach out to Mr12Volt via WhatsApp for next steps and guidance.
@Thomas_@Roman ACS I installed the new firmware for my PCM 3.0 PDK car. No perceptible change. I still get a black screen with gridlines when shifting into reverse. I'll reach out to Mr12Volt via WhatsApp for next steps and guidance.
i believe this is resolved by switching the dipswitch position in slot 1 on the p2000 module
This is a pcm3.0 kit I purchased from another sponsor, carlinklife, no complicated connection setup. Only the PCB board needs to be connected. It only took a week from ordering to receiving it.
Trying to install it over the next few days and hopefully I won't be disappointed.
This is a pcm3.0 kit I purchased from another sponsor, carlinklife, no complicated connection setup. Only the PCB board needs to be connected. It only took a week from ordering to receiving it.
Trying to install it over the next few days and hopefully I won't be disappointed.
It's an isudar clone. It's better than stock but far cry from a mr12volt kit.
@Roman ACS Roman, would it be possible to get another plug-in connector for the MOST cable? The small tab that actually holds the MOST cable into the connector has broken and now I can't get the MOST cable to remain plugged into the Mr12Volt unit. Hope you can help out!!! Thanks and Happy Thanksgiving!!!!!
@Roman ACS Roman, would it be possible to get another plug-in connector for the MOST cable? The small tab that actually holds the MOST cable into the connector has broken and now I can't get the MOST cable to remain plugged into the Mr12Volt unit. Hope you can help out!!! Thanks and Happy Thanksgiving!!!!!
Toby Pennycuff
I have spare parts. Please give me a call. 2673178229.
11-09-2023, 10:57 AM
