What did you do to your 997 today?
More upholstery projects... Got the dome light panel covered.
Patterned the panel:
Transferred and sewn the leather pattern. Thread matched sand beige. Panel is cocoa brown.
Installed and added LED interior lights
Patterned the panel:
Transferred and sewn the leather pattern. Thread matched sand beige. Panel is cocoa brown.
Installed and added LED interior lights
Last edited by Scotts Elle; 01-03-2022 at 12:44 PM.
The following 12 users liked this post by Scotts Elle:
anewman (01-03-2022),
Coppakid (01-04-2022),
frederickcook87 (01-16-2022),
frybear (01-03-2022),
Full Boost (01-04-2022),
and 7 others liked this post.
I wanted to do the doors as well (since my car didn't come with full leather option) but I already gave up after doing center console.
The following users liked this post:
Skube (01-09-2022)
Rennlist Member
changed all four brake pads and rotors, and bled the brakes. discovered that instead of a plastic clip, some zip ties were holding down the rear brake pad wear sensors to the metal bracket behind the rotor. see picture below (not my picture but shows the part). anybody know what the part number for this is?
Last edited by ahyiah; 01-03-2022 at 06:29 PM.
Rennlist Member
I detailed the OZ racing wheels & dressed the Hoosiers in satin gloss.
Then drove it .
Then drove it .
Last edited by RDS928S; 01-04-2022 at 03:47 PM.
The following 5 users liked this post by RDS928S:
Breakthru (01-05-2022),
cjarrett (01-03-2022),
frederickcook87 (01-16-2022),
Mr. Merk (01-08-2022),
Presto (01-04-2022)
Rennlist Member
changed all four brake pads and rotors, and bled the brakes. discovered that instead of a plastic clip, some zip ties were holding down the rear brake pad wear sensors to the metal bracket behind the rotor. see picture below (not my picture but shows the part). anybody know what the part number for this is?
https://www.pelicanparts.com/More_In...507-464-40-OEM
Instructor
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
The following users liked this post:
irnnr (01-05-2022)
The following 2 users liked this post by RangerRick:
ATX_Native (01-05-2022),
TerrestrialFlyte (01-05-2022)
Rennlist Member
The wheel looks great though!
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
@kellen does the heat work?
Now just dealing with a small noise. I think the wheel is hitting the steering surround. Only happens 10% of the rotation of the wheel. Will have to disassemble and refit.
Rennlist Member
The 981 (2016) GT4 only comes in Manual. I believe many people have removed the sport plus circle but not sure what is left behind....
Rennlist Member
Installed my recently re-sprayed front bumper and installed a FabSpeed intake this afternoon.
Yes I am aware the deck lid does not need to be removed for an air intake install; it is off for other reasons, will share soon!
Yes I am aware the deck lid does not need to be removed for an air intake install; it is off for other reasons, will share soon!
The following 3 users liked this post by Skube: