When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I saw your post regarding the 997.2 turbo conversion
I have a 2007 Turbo 911 Tiptronic
I got these parts ready
rear bumper 997.2
taillights led
rear module
do i need the front module to work?
and my friend who did a 997 c2s conversion is not sure about the pin swap, can you explain or give me further setup instructions?
Thank you so much.
You have a very nice car.
swap the #14 to 34 and 6 to 21 pins in the black connector of the front control unit. As we discovered when things were put
We then ordered the rear control unit
from the 2009 Turbo too. We also swapped the the pins for the front from #11 to 36 because Ethan says it'd be necessary to do
that if the lights were flashing fast. The rears were swapped from #42 to 31. So, if you have a 2007 or even a 2008, it might