actually I have 2 high mounted LED lightbars that with a strobe control flash 3 times then hold steady when I step on the brakes, plus I have joined the brake and running lights on each side to give me wider running lights and wider brake lights. I pressed in steel dual contact bulb holders in the 4 positions and wired accordingly and installed LEDs everywhere including amber led arcs in the headlights where the inner arc is my DRL and the outer arc light with the signals.

Use my email address since I do not always see messages on rennlist
waynestrutt@295.ca

Ron
you have to remove the bumper cover and unhokk the taillight wiring. The bumper shocks will need some type of puller to get them out of the frame after the bolts are out. Are you sure they need replacing. I think one of mine was hit and is a little deeper than the other but not enough to struggle with all this work. Mine is apart for painting and if on assembly it is necessary I will shim the bumperette.