Hi Duke

I've been reading your posts ref head studs with interest

I race a Alfa Romeo around 450 bhp SC
I've been using APR head studs for a 968 Porsche 12x1.5 166mm long

We have had some head lift
Im interested in what you have found to improve your set up

I see you have gone to a larger dia stud 9/16 is this an off the shelf stud or some thing else ?

Would you mind emailing me so we can chat please sales@alfacare.co.uk
it would be a great help

Kind Regards Adrian

Hi Gustaf! Shane here is California

I've messaged you before and asked you about injectors size. Well, we are deciding to go with E85 so I know the injector size changes then. I'm going with injector dynamics.. so my options are 1300 or 1700cc. What are your thoughts? Also, can I get away wit running on 044 pump or should I run two?
My other concerns is spark plugs? Do you need to run a hotter plug with E85? You mind if I ask what you're running and if so can I get a part number for your plugs to look them up please?
Tsnks for all your help and so for the fifty questions. Aporeciate what you've done and everyone is a know it all on here except a few people like yourself!

Thank you!!

Shane

..

Hi Duke! My name is Shane from over here in California. Duke, I'm putting a 3.2l dry sump 8v big valve 2.7 head bigger than stock etc motor together for my brother. It's either going to be Motec or AEM infinity controlled. GT3586 which is a forced performance 86mm billet wheel wit ha .82ar Tial housing. It's a street car running on c16 and my goal in 550+ to 600 whp. What size injectors do you think I really need? Are 1200cc enough? 1600?
I'm not on here much and really don't post anything etc.. Here's my Email address if it helps. Mail2turbo@yahoo.com
I've read a lot about yiu and your achievements and respect your thoughts and advice!!! Thanks in advance.

Shane

How could I find your youtube channel?

Maybe there is I'll look again!

Hi i hope you well

So is there nothing on my FS thread that would help pry that cometec gasket from hands

or is there a $ figure .