Hi
this is Tony I will need to get more information on the car. I will call you or you may call me at 570 922 1082 . Thanks for your response

Kevin
This Rick from the Billet FPR Thread. Can you send me a smaller nut for the hose adapter or give me the specs to buy my own from MC?
Here's my address in case you get this message. I can't get PMs because I'm not a paid member anymore.

Rick Sobek
5007 South Pioneer Rd
Gibsonia, PA 15044
rsobek@delreywindows.com

Thanks
Rick

Hi Kevin,
I thought I'd reach out to you directly for advice. Hope you don't mind. I just had a nightmare experience with German Car Repair with my 79 928 and was hoping you could give me some guidance. Any chance you can call me at 678-576-7921?
Thanks
Chad

Hi Kevin!
Sorry to disturb you by pm
I am looking to buy the two belly pans to completed my '88s4 project.
I was thinking, probably you have some used ones from your parts cars?
Please let me know if you have any?
Regards
Dimitri

Kevin,
My name is Joshua Stern and I have a 1990 928GT that Greg Brown rebuilt the motor in. The car is here in Old Fourth Ward, ATL and he suggested that we get together so you can look at the car. I would love to chat when you have a moment. 310-989-3727.
Best,
J

Hello Kevin,

I saw your advise for Eibach kits.
Would you ship one to Rieti, Italy, zip code 02100?
Do you think they could work with a B6 Bilstein set?

Thanks in advance for any answer.

Enrico.

It's your intermediate plate. sounds like it needs adjusting. tell tale signs.

Hello Kevin, Rich here I have recently pulled my enging to fix stuff and get some of the items powder coated. I was just wondering if you know of a reputable place to get the intake and some other stuff Powder coated in this area?

kevin: I think it is a Porsche cdr 220 Thanks: Larry

Hi Kevin,
I tried sending a message to "my928parts@mindspring.com" but it bounced...
This is Mark from over in Peachtree Corners.
I am in need of a 928.505.273.02 (it is a rear bumper cover retaining strip).
I was trying to realign my rear bumper beading and have removed the rear bumper.
The piece I need is the horizontal strip that mounts just under the hatch.
Please see the attached picture from the PET parts catalog. I need item #18.
I am wondering if you might have one of these available on either of your parts cars.
928 International has some used ones, but I was hoping to get one sooner from you.
It comes right off with just four nuts, and I'd be glad to come and remove it myself.
Please let me know. My car is all apart and I need too get it back together...
Thanks very much,
Mark.