sdstimson

does anyone know where to buy a 968 wing, or the adjustable turbo s wing? thanks

Spidey944

There are some replica stuff here....

http://gt-racing.com/pdfs/GTR944.pdf

HTH and BTW, if you find a compete 968 hatch for less than 1500 you've done pretty well....

jstand22

go on ebay and search for the seller "malla400". He sells 968 spoilers, I believe a few members here use them. He's located in the UK, and altough shipping is a bit pricey the final price isn't all that bad.

JimV8

http://www.v-zweeden.com/product_inf...roducts_id=325

I was also looking for a wing and found these guys.

sdstimson

Thanks, I think I'm going to go with the one from malla400 can't beat that price, has anyone had expirience with his wings before?

PorscheDude1

sdstimson
Could you post a link for it?
I searched US and UK ebay and could not find that user.

PorscheDude1

Never mind I found it.
I found this one as well.
http://cgi.ebay.co.uk/ws/eBayISAPI.d...link:middle:uk

alex

I've seen these come up on here before. I think the more expensive one is more of a 968 replica, while the other is similar, but not the same. If you have the money, I'd go with the actual replica, but I think that the 968 spoiler is about the best looking one Porsche ever built, so I'm a bit biased.

Skip Wolfe

http://www.americaninternationalraci...alleryid=25670

968 Turbo S Adjustable Rear Wing. Will upgrade 968 or 944S-2. with no additional parts. To install this wing on a 944 an additional 968 moulding kit is required.

968-3557 968 Turbo S Wing $800
968-M100 968 Moulding Kit $1300

Techno Duck

No first hand experience with the adjustable wing from AIR, but i read a few posts on the 968 forum that said those who did have it were not to happy with it. Required alot of fitment..but then again what replica fiberglass parts dont?

I am curious to know if anyone has experience with any of the other replicas out there, as i would like to eventually get one for my car. I already have the 3 trim pieces...so i guess im halfway there.

tifosiman

Just to clarify, it will only not need the additional moulding kit if the 944S2 was one of the late ones that came with the bridge spoiler. If it came with the standard rubber tray spoiler it would need the additional moulding kit.

V2Rocket

So is that^ the 968 spoiler in question? I thought 968's came with the better-looking hoop spoiler

sdstimson

http://www.porschepalace.com/944pg.htm
I also found this page they also have body pieces for many other porsches to.

uscarrera

Saw my 968CS from the Excellence article from a few years ago, just to be clear that is factory 968RS wing from Germany.

Voith

funny. I have the spoiler itself, but am missing trim pieces