Dudley

Does any one have a picture of the HD Bilsteins and lowering collars installed?

Thanks, Dave

Paul902

Hi Dave,

If you mean a picture of the car, not the components themselves, there was some discussion of this previously here, and I clipped the following pictures. First shows a car with the lowering perches, the second without. I do not recall who posted these, but be aware that in either case there is a range of adjustment possible.

hope that helps ya!

STLPCA

I have it on good authority that the black car is dropped as far as possible w/the standard HD Bilstein front threads.

Dudley

Thanks Paul & Dan,
Both cars look great but something between the two would be my goal.
I was hoping someone might have a picture of the strut with the lowering collar installed.

Dave

Macca

Hi dudley. I have a detailed set of piccies Gert emailed me when I had my HDs installed. I went almost bag in between ROW M030 and RS. Can send you pics, instructions and photos of my car if you give me your email address.

Cheers

donsacto

Macca:

I'd be interested in the pics etc also. Please email to 993c2s@gmail.com

Thanks,

kkim

Could someone post the pics of Macca's car once they get them or you could send them to me, I'd be more than happy to do so.

Thanks

STLPCA

Dave
Perhaps Viken will repost a pic of the lowering perch he had fabricated. It's disappeared from his post of a couple of years ago:
Bilstein HD Shocks - Solution For More Lowering

kkim

Macca's Pictures...

Dudley

Dan, Macca, Kelly - thanks so much. It is funny how few "assembled" photos are on line.
Viken, I would be happy with Dan's or Macca's final height but I would appreciate seeing your install pictures, if still available.

TIA, Dave

Viken

Sure thing:

Dudley

Thanks so much for the trouble, Viken. It is a good reference point. I also notice that your collars have a set screw to lock them in place - I may add one to mine. Although Mark assurred me they would not move without a locking device..

Dave

STLPCA

Thanks V