► Official APEX Wheels Showroom Gallery
#196
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
- Brandon
__________________
APEX Wheels - expert@apexwheels.com
Website - Blog - Instagram - Porsche Fitment Guides
APEX Wheels - expert@apexwheels.com
Website - Blog - Instagram - Porsche Fitment Guides
The following users liked this post:
Chalk992911S (03-21-2023)
#197
Rennlist Member
Hey Brandon,
I know the answer but is there any chance you guys will release a 18x8.5 et45 in the EC7RS in the future like the SM10?
Personally the 18x10.5 et44 works in rear since I use 285/35-18 MPS4S tires.
Looking for a set of light 18” wheels and I am afraid the 18x9 et46 will be too aggressive without lots of camber plus I only want to run 235/40 in front.
How much camber or inner fender work did you guys have to dial in on the 997 18x9 cars?
I know the answer but is there any chance you guys will release a 18x8.5 et45 in the EC7RS in the future like the SM10?
Personally the 18x10.5 et44 works in rear since I use 285/35-18 MPS4S tires.
Looking for a set of light 18” wheels and I am afraid the 18x9 et46 will be too aggressive without lots of camber plus I only want to run 235/40 in front.
How much camber or inner fender work did you guys have to dial in on the 997 18x9 cars?
#198
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Hey Brandon,
I know the answer but is there any chance you guys will release a 18x8.5 et45 in the EC7RS in the future like the SM10?
Personally the 18x10.5 et44 works in rear since I use 285/35-18 MPS4S tires.
Looking for a set of light 18” wheels and I am afraid the 18x9 et46 will be too aggressive without lots of camber plus I only want to run 235/40 in front.
How much camber or inner fender work did you guys have to dial in on the 997 18x9 cars?
I know the answer but is there any chance you guys will release a 18x8.5 et45 in the EC7RS in the future like the SM10?
Personally the 18x10.5 et44 works in rear since I use 285/35-18 MPS4S tires.
Looking for a set of light 18” wheels and I am afraid the 18x9 et46 will be too aggressive without lots of camber plus I only want to run 235/40 in front.
How much camber or inner fender work did you guys have to dial in on the 997 18x9 cars?
- Brandon
The following users liked this post:
ATX_Native (01-13-2023)
#199
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
991.1 GT3
20" VS-5RS in Brushed Clear
Front: 20x9”ET47 - 245/35-20
Rear: 20x12" ET47 - 305/30-20
Tires: Michelin Cup 2
20" VS-5RS in Anthracite
Front: 20x9”ET47 - 245/35-20
Rear: 20x12" ET47 - 305/30-20
Tires: Michelin Cup 2
- Brandon
The following users liked this post:
myusername (01-31-2023)
#201
Rennlist Member
Here are a few shots of my Apex VS-5RS wheels mounted to my SharkBlue GT4 with PCCBs. Man I love these wheels!
The following 2 users liked this post by BabyNSX:
Apex Wheels (02-13-2023),
RDS928S (02-24-2023)
#202
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Minicorsa's 991.2 GT3
19" EC-7RS in Motorsport Gold
Front: 19x9.5" ET50 - 265/35-19
Rear: 19x12" ET46 - 325/30-19
Tires: Goodyear Supercar 3R
- Brandon
19" EC-7RS in Motorsport Gold
Front: 19x9.5" ET50 - 265/35-19
Rear: 19x12" ET46 - 325/30-19
Tires: Goodyear Supercar 3R
Last edited by Apex Wheels; 02-23-2023 at 07:01 PM.
#203
@APEXRaceParts, do you know what Porsche OE center caps match with your anthracite finish? I have SM-10RS on GangUp.com for the groupbuy but want to get Porsche OE centercaps so I'm ready to install.
#205
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
@APEXRaceParts, do you know what Porsche OE center caps match with your anthracite finish? I have SM-10RS on GangUp.com for the groupbuy but want to get Porsche OE centercaps so I'm ready to install.
Post #246
Post #247
- Brandon
#206
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
992 GT3
19" EC-7RS in Motorsport Gold
F: 19x10" ET42 with 265/35-19
R: 19x13" ET45 with 325/30-19
Tires: Michelin Cup 2
Stock 992 GT3 with a track alignment which is required for appropriate wheel/tire clearances.
DISCLAIMER: 19" WHEELS REQUIRE DOWNSIZING FRONT BRAKES FOR BOTH STEEL AND PCCB CARS. REFER TO AP ESSEX BRAKE OFFERINGS
- Brandon
The following users liked this post:
Chalk992911S (03-21-2023)
#207
this may be a long shot but does anyone have pics of any 18" wheels in motorsport gold on a cayman or 911? Bonus point if its an SM10RS. Trying to decide on color for new track wheel setup on a 981.
#208
992 GT3
19" EC-7RS in Motorsport Gold
F: 19x10" ET42 with 265/35-19
R: 19x13" ET45 with 325/30-19
Tires: Michelin Cup 2
Stock 992 GT3 with a track alignment which is required for appropriate wheel/tire clearances.
DISCLAIMER: 19" WHEELS REQUIRE DOWNSIZING FRONT BRAKES FOR BOTH STEEL AND PCCB CARS. REFER TO AP ESSEX BRAKE OFFERINGS
- Brandon
Now can we do 992 C2/C2S?
The 19x10 squared SM10’s from my track Mustang will not fit on the incoming 992 C2S
You guys have nailed the track-wheel setups for specific vehicle types. Kudos!
- Signed,
An already very happy Apex customer.
Last edited by Chalk992911S; 03-21-2023 at 03:56 AM.
#209
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
As I get more photography from either our team or customers I will be adding them to that Gallery as well as sharing some of them here in this thread.
- Brandon
The following users liked this post:
Chalk992911S (03-21-2023)
#210
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Check out the below Wheel Gallery post with our 992 Fitment!
- Brandon
The following users liked this post:
Chalk992911S (03-21-2023)